Details

AC100+ Gold    Vinylester Injection Adhesive Anchoring System

Product Description :
The AC100+ Gold is a two-component vinylester adhesive anchoring system. The systemincludes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and holecleaning equipment. The AC100+ Gold is designed for bonding threaded rod and reinforcingbar elements into drilled holes in concrete and masonry base materials.

General Applications and Uses :

Bonding threaded rod and reinforcing bar into hardened concrete and masonry

Evaluated for use in dry and water-saturated concrete including water illed holes

Suitable to resist loads in cracked or uncracked concrete base materials for cases where anchor design theory and criteria applies

Can be installed in a wide range of base material temperatures

Qualiied for seismic and wind loading (see ESR-2582)

Features and Benefits :
+ Designed for use with threaded rod and reinforcing bar hardware elements
+ Consistent performance in low and high strength concrete (2,500 to 8,500 psi)
+ Evaluated and recognized for freeze/thaw performance
+ Evaluated and recognized for a range of embedments in interior and exterior applications
+ Versatile low odor formula with quick cure time
+ Evaluated and recognized for long term and short term loading (see performance tables)
+ Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
+ Cartridge design allows for multiple uses using extra mixing nozzles

Approvals and Listings :
International Code Council, Evaluation Service (ICC-ES) ESR-2582 (Including FBC Supplement)Code compliant with the 2009 IBC, 2009 IRC, 2006 IBC, 2006 IRC, 2003 IBC and 2003 IRCTested in accordance with ASTM E 488 and ICC-ES AC308 for use in structural concrete with ACI 318 Appendix D (Strength Design) and as amended by provisions of ICC-ES AC308 Annex A, Section 3.3 (www.icc-es.org) Compliant with NSF/ANSI Standard 61 for drinking water system components – health effects; minimum requirements for materials in contact with potable water and water treatmentConforms to requirements of ASTM C 881, Types I, II, IV and V, Grade 3, Classes A & B (meets Type III with exception of elongation)Department of Transportation listings – see www.powers.com or contact transportation agency

Guide Specifications :
CSI Divisions: 03 16 00 - Conrete Anchors, 04 05 19.16 - Masonry Anchors and 05 05 19 - Post-Installed Concrete Anchors. Adhesive anchoring system shall be AC100+ Gold as suppliedby Powers Fasteners, Inc., Brewster, NY. Anchors shall be installed in accordance with published instructions and requirements of the Authority Having Jurisdiction.

View Product Specification

English
Francais

View Submittals
English

View Product Profiles
Guilford Detention Center - Greensboro, NC
View Cold Weather Usage Report

View Instruction Card
English
Espanol
Francais

View Chemical Resistance Charts

View Approvals

Spec. Writting Tools
View Material Safety Data Sheets

English
Espanol
Francais
Powers Adhesive Calculator

Additional Information

Manufacturer: Anchors Powers DeWalt